Dependencies/libvorbis/doc/Makefile.in

   1 # Makefile.in generated by automake 1.10.2 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 VPATH = @srcdir@
  18 pkgdatadir = $(datadir)/@PACKAGE@
  19 pkglibdir = $(libdir)/@PACKAGE@
  20 pkgincludedir = $(includedir)/@PACKAGE@
  21 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  22 install_sh_DATA = $(install_sh) -c -m 644
  23 install_sh_PROGRAM = $(install_sh) -c
  24 install_sh_SCRIPT = $(install_sh) -c
  25 INSTALL_HEADER = $(INSTALL_DATA)
  26 transform = $(program_transform_name)
  27 NORMAL_INSTALL = :
  28 PRE_INSTALL = :
  29 POST_INSTALL = :
  30 NORMAL_UNINSTALL = :
  31 PRE_UNINSTALL = :
  32 POST_UNINSTALL = :
  33 build_triplet = @build@
  34 host_triplet = @host@
  35 target_triplet = @target@
  36 subdir = doc
  37 DIST_COMMON = $(srcdir)/Doxyfile.in $(srcdir)/Makefile.am \
  38         $(srcdir)/Makefile.in
  39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  40 am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \
  41         $(top_srcdir)/m4/ogg.m4 $(top_srcdir)/m4/pkg.m4 \
  42         $(top_srcdir)/configure.ac
  43 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  44         $(ACLOCAL_M4)
  45 mkinstalldirs = $(install_sh) -d
  46 CONFIG_HEADER = $(top_builddir)/config.h
  47 CONFIG_CLEAN_FILES = Doxyfile
  48 SOURCES =
  49 DIST_SOURCES =
  50 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  51         html-recursive info-recursive install-data-recursive \
  52         install-dvi-recursive install-exec-recursive \
  53         install-html-recursive install-info-recursive \
  54         install-pdf-recursive install-ps-recursive install-recursive \
  55         installcheck-recursive installdirs-recursive pdf-recursive \
  56         ps-recursive uninstall-recursive
  57 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  58 am__vpath_adj = case $$p in \
  59     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  60     *) f=$$p;; \
  61   esac;
  62 am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
  63 am__installdirs = "$(DESTDIR)$(docdir)"
  64 docDATA_INSTALL = $(INSTALL_DATA)
  65 DATA = $(doc_DATA)
  66 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
  67   distclean-recursive maintainer-clean-recursive
  68 ETAGS = etags
  69 CTAGS = ctags
  70 DIST_SUBDIRS = $(SUBDIRS)
  71 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  72 ACLOCAL = @ACLOCAL@
  73 ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@
  74 ALLOCA = @ALLOCA@
  75 AMTAR = @AMTAR@
  76 AR = @AR@
  77 AS = @AS@
  78 AUTOCONF = @AUTOCONF@
  79 AUTOHEADER = @AUTOHEADER@
  80 AUTOMAKE = @AUTOMAKE@
  81 AWK = @AWK@
  82 CC = @CC@
  83 CCDEPMODE = @CCDEPMODE@
  84 CFLAGS = @CFLAGS@
  85 CPP = @CPP@
  86 CPPFLAGS = @CPPFLAGS@
  87 CYGPATH_W = @CYGPATH_W@
  88 DEBUG = @DEBUG@
  89 DEFS = @DEFS@
  90 DEPDIR = @DEPDIR@
  91 DLLTOOL = @DLLTOOL@
  92 DSYMUTIL = @DSYMUTIL@
  93 DUMPBIN = @DUMPBIN@
  94 ECHO_C = @ECHO_C@
  95 ECHO_N = @ECHO_N@
  96 ECHO_T = @ECHO_T@
  97 EGREP = @EGREP@
  98 EXEEXT = @EXEEXT@
  99 FGREP = @FGREP@
 100 GREP = @GREP@
 101 HAVE_DOXYGEN = @HAVE_DOXYGEN@
 102 HTLATEX = @HTLATEX@
 103 INSTALL = @INSTALL@
 104 INSTALL_DATA = @INSTALL_DATA@
 105 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 106 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 107 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 108 LD = @LD@
 109 LDFLAGS = @LDFLAGS@
 110 LIBOBJS = @LIBOBJS@
 111 LIBS = @LIBS@
 112 LIBTOOL = @LIBTOOL@
 113 LIBTOOL_DEPS = @LIBTOOL_DEPS@
 114 LIPO = @LIPO@
 115 LN_S = @LN_S@
 116 LTLIBOBJS = @LTLIBOBJS@
 117 MAINT = @MAINT@
 118 MAKEINFO = @MAKEINFO@
 119 MKDIR_P = @MKDIR_P@
 120 NM = @NM@
 121 NMEDIT = @NMEDIT@
 122 OBJDUMP = @OBJDUMP@
 123 OBJEXT = @OBJEXT@
 124 OGG_CFLAGS = @OGG_CFLAGS@
 125 OGG_LIBS = @OGG_LIBS@
 126 OTOOL = @OTOOL@
 127 OTOOL64 = @OTOOL64@
 128 PACKAGE = @PACKAGE@
 129 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 130 PACKAGE_NAME = @PACKAGE_NAME@
 131 PACKAGE_STRING = @PACKAGE_STRING@
 132 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 133 PACKAGE_VERSION = @PACKAGE_VERSION@
 134 PATH_SEPARATOR = @PATH_SEPARATOR@
 135 PDFLATEX = @PDFLATEX@
 136 PKG_CONFIG = @PKG_CONFIG@
 137 PROFILE = @PROFILE@
 138 RANLIB = @RANLIB@
 139 SED = @SED@
 140 SET_MAKE = @SET_MAKE@
 141 SHELL = @SHELL@
 142 STRIP = @STRIP@
 143 VERSION = @VERSION@
 144 VE_LIB_AGE = @VE_LIB_AGE@
 145 VE_LIB_CURRENT = @VE_LIB_CURRENT@
 146 VE_LIB_REVISION = @VE_LIB_REVISION@
 147 VF_LIB_AGE = @VF_LIB_AGE@
 148 VF_LIB_CURRENT = @VF_LIB_CURRENT@
 149 VF_LIB_REVISION = @VF_LIB_REVISION@
 150 VORBIS_LIBS = @VORBIS_LIBS@
 151 V_LIB_AGE = @V_LIB_AGE@
 152 V_LIB_CURRENT = @V_LIB_CURRENT@
 153 V_LIB_REVISION = @V_LIB_REVISION@
 154 abs_builddir = @abs_builddir@
 155 abs_srcdir = @abs_srcdir@
 156 abs_top_builddir = @abs_top_builddir@
 157 abs_top_srcdir = @abs_top_srcdir@
 158 ac_ct_CC = @ac_ct_CC@
 159 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 160 am__include = @am__include@
 161 am__leading_dot = @am__leading_dot@
 162 am__quote = @am__quote@
 163 am__tar = @am__tar@
 164 am__untar = @am__untar@
 165 bindir = @bindir@
 166 build = @build@
 167 build_alias = @build_alias@
 168 build_cpu = @build_cpu@
 169 build_os = @build_os@
 170 build_vendor = @build_vendor@
 171 builddir = @builddir@
 172 datadir = @datadir@
 173 datarootdir = @datarootdir@
 174 docdir = $(datadir)/doc/$(PACKAGE)-$(VERSION)
 175 dvidir = @dvidir@
 176 exec_prefix = @exec_prefix@
 177 host = @host@
 178 host_alias = @host_alias@
 179 host_cpu = @host_cpu@
 180 host_os = @host_os@
 181 host_vendor = @host_vendor@
 182 htmldir = @htmldir@
 183 includedir = @includedir@
 184 infodir = @infodir@
 185 install_sh = @install_sh@
 186 libdir = @libdir@
 187 libexecdir = @libexecdir@
 188 localedir = @localedir@
 189 localstatedir = @localstatedir@
 190 lt_ECHO = @lt_ECHO@
 191 mandir = @mandir@
 192 mkdir_p = @mkdir_p@
 193 oldincludedir = @oldincludedir@
 194 pdfdir = @pdfdir@
 195 prefix = @prefix@
 196 program_transform_name = @program_transform_name@
 197 psdir = @psdir@
 198 pthread_lib = @pthread_lib@
 199 sbindir = @sbindir@
 200 sharedstatedir = @sharedstatedir@
 201 srcdir = @srcdir@
 202 sysconfdir = @sysconfdir@
 203 target = @target@
 204 target_alias = @target_alias@
 205 target_cpu = @target_cpu@
 206 target_os = @target_os@
 207 target_vendor = @target_vendor@
 208 top_builddir = @top_builddir@
 209 top_srcdir = @top_srcdir@
 210 SUBDIRS = vorbisfile vorbisenc
 211
 212 ### all of the static docs, commited to SVN and included as is
 213 static_docs = \
 214         rfc5215.xml \
 215         rfc5215.txt \
 216         eightphase.png \
 217         evenlsp.png \
 218         fish_xiph_org.png \
 219         floor1_inverse_dB_table.html \
 220         floorval.png \
 221         fourphase.png \
 222         framing.html \
 223         helper.html \
 224         index.html \
 225         lspmap.png \
 226         oddlsp.png \
 227         oggstream.html \
 228         programming.html \
 229         squarepolar.png \
 230         stereo.html \
 231         stream.png \
 232         v-comment.html \
 233         vorbis-clip.txt \
 234         vorbis-errors.txt \
 235         vorbis-fidelity.html \
 236         vorbis.html \
 237         vorbisword2.png \
 238         wait.png \
 239         white-xifish.png
 240
 241
 242 # bits needed by the spec
 243 SPEC_PNG = \
 244         components.png \
 245         floor1-1.png \
 246         floor1-2.png \
 247         floor1-3.png \
 248         floor1-4.png \
 249         hufftree.png \
 250         hufftree-under.png \
 251         residue-pack.png \
 252         residue2.png \
 253         white-xifish.png \
 254         window1.png \
 255         window2.png
 256
 257 SPEC_PDF = xifish.pdf
 258
 259 # FIXME: also needed here
 260 #       white-xifish.png
 261 SPEC_TEX = \
 262         Vorbis_I_spec.tex \
 263         01-introduction.tex \
 264         02-bitpacking.tex \
 265         03-codebook.tex \
 266         04-codec.tex   \
 267         05-comment.tex \
 268         06-floor0.tex  \
 269         07-floor1.tex  \
 270         08-residue.tex \
 271         09-helper.tex  \
 272         10-tables.tex  \
 273         a1-encapsulation-ogg.tex \
 274         a2-encapsulation-rtp.tex \
 275         footer.tex
 276
 277 built_docs = Vorbis_I_spec.pdf Vorbis_I_spec.html Vorbis_I_spec.css
 278 @BUILD_DOCS_FALSE@doc_DATA = $(static_docs) doxygen-build.stamp
 279
 280 # conditionally make the generated documentation
 281 @BUILD_DOCS_TRUE@doc_DATA = $(static_docs) $(SPEC_PNG) $(built_docs) doxygen-build.stamp
 282 EXTRA_DIST = $(static_docs) $(built_docs) \
 283         $(SPEC_TEX) $(SPEC_PNG) $(SPEC_PDF) Vorbis_I_spec.cfg Doxyfile.in
 284
 285
 286 # these are expensive; only remove if we have to
 287 MAINTAINERCLEANFILES = $(built_docs)
 288 CLEANFILES = $(SPEC_TEX:%.tex=%.aux) \
 289              Vorbis_I_spec.4ct Vorbis_I_spec.4tc \
 290              Vorbis_I_spec.dvi Vorbis_I_spec.idv \
 291              Vorbis_I_spec.lg  Vorbis_I_spec.log \
 292              Vorbis_I_spec.out Vorbis_I_spec.tmp \
 293              Vorbis_I_spec.toc Vorbis_I_spec.xref \
 294              Vorbis_I_spec*.png \
 295              zzVorbis_I_spec.ps xifish.png
 296
 297 DISTCLEANFILES = $(built_docs)
 298 all: all-recursive
 299
 300 .SUFFIXES:
 301 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 302         @for dep in $?; do \
 303           case '$(am__configure_deps)' in \
 304             *$$dep*) \
 305               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 306                 && { if test -f $@; then exit 0; else break; fi; }; \
 307               exit 1;; \
 308           esac; \
 309         done; \
 310         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
 311         cd $(top_srcdir) && \
 312           $(AUTOMAKE) --gnu  doc/Makefile
 313 .PRECIOUS: Makefile
 314 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 315         @case '$?' in \
 316           *config.status*) \
 317             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 318           *) \
 319             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 320             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 321         esac;
 322
 323 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 324         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 325
 326 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 327         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 328 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 329         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 330 Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
 331         cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 332
 333 mostlyclean-libtool:
 334         -rm -f *.lo
 335
 336 clean-libtool:
 337         -rm -rf .libs _libs
 338 install-docDATA: $(doc_DATA)
 339         @$(NORMAL_INSTALL)
 340         test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
 341         @list='$(doc_DATA)'; for p in $$list; do \
 342           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 343           f=$(am__strip_dir) \
 344           echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
 345           $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
 346         done
 347
 348 uninstall-docDATA:
 349         @$(NORMAL_UNINSTALL)
 350         @list='$(doc_DATA)'; for p in $$list; do \
 351           f=$(am__strip_dir) \
 352           echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
 353           rm -f "$(DESTDIR)$(docdir)/$$f"; \
 354         done
 355
 356 # This directory's subdirectories are mostly independent; you can cd
 357 # into them and run `make' without going through this Makefile.
 358 # To change the values of `make' variables: instead of editing Makefiles,
 359 # (1) if the variable is set in `config.status', edit `config.status'
 360 #     (which will cause the Makefiles to be regenerated when you run `make');
 361 # (2) otherwise, pass the desired values on the `make' command line.
 362 $(RECURSIVE_TARGETS):
 363         @failcom='exit 1'; \
 364         for f in x $$MAKEFLAGS; do \
 365           case $$f in \
 366             *=* | --[!k]*);; \
 367             *k*) failcom='fail=yes';; \
 368           esac; \
 369         done; \
 370         dot_seen=no; \
 371         target=`echo $@ | sed s/-recursive//`; \
 372         list='$(SUBDIRS)'; for subdir in $$list; do \
 373           echo "Making $$target in $$subdir"; \
 374           if test "$$subdir" = "."; then \
 375             dot_seen=yes; \
 376             local_target="$$target-am"; \
 377           else \
 378             local_target="$$target"; \
 379           fi; \
 380           (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 381           || eval $$failcom; \
 382         done; \
 383         if test "$$dot_seen" = "no"; then \
 384           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 385         fi; test -z "$$fail"
 386
 387 $(RECURSIVE_CLEAN_TARGETS):
 388         @failcom='exit 1'; \
 389         for f in x $$MAKEFLAGS; do \
 390           case $$f in \
 391             *=* | --[!k]*);; \
 392             *k*) failcom='fail=yes';; \
 393           esac; \
 394         done; \
 395         dot_seen=no; \
 396         case "$@" in \
 397           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 398           *) list='$(SUBDIRS)' ;; \
 399         esac; \
 400         rev=''; for subdir in $$list; do \
 401           if test "$$subdir" = "."; then :; else \
 402             rev="$$subdir $$rev"; \
 403           fi; \
 404         done; \
 405         rev="$$rev ."; \
 406         target=`echo $@ | sed s/-recursive//`; \
 407         for subdir in $$rev; do \
 408           echo "Making $$target in $$subdir"; \
 409           if test "$$subdir" = "."; then \
 410             local_target="$$target-am"; \
 411           else \
 412             local_target="$$target"; \
 413           fi; \
 414           (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 415           || eval $$failcom; \
 416         done && test -z "$$fail"
 417 tags-recursive:
 418         list='$(SUBDIRS)'; for subdir in $$list; do \
 419           test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 420         done
 421 ctags-recursive:
 422         list='$(SUBDIRS)'; for subdir in $$list; do \
 423           test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 424         done
 425
 426 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 427         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 428         unique=`for i in $$list; do \
 429             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 430           done | \
 431           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 432               END { if (nonempty) { for (i in files) print i; }; }'`; \
 433         mkid -fID $$unique
 434 tags: TAGS
 435
 436 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 437                 $(TAGS_FILES) $(LISP)
 438         tags=; \
 439         here=`pwd`; \
 440         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 441           include_option=--etags-include; \
 442           empty_fix=.; \
 443         else \
 444           include_option=--include; \
 445           empty_fix=; \
 446         fi; \
 447         list='$(SUBDIRS)'; for subdir in $$list; do \
 448           if test "$$subdir" = .; then :; else \
 449             test ! -f $$subdir/TAGS || \
 450               tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
 451           fi; \
 452         done; \
 453         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 454         unique=`for i in $$list; do \
 455             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 456           done | \
 457           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 458               END { if (nonempty) { for (i in files) print i; }; }'`; \
 459         if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
 460           test -n "$$unique" || unique=$$empty_fix; \
 461           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 462             $$tags $$unique; \
 463         fi
 464 ctags: CTAGS
 465 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 466                 $(TAGS_FILES) $(LISP)
 467         tags=; \
 468         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 469         unique=`for i in $$list; do \
 470             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 471           done | \
 472           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 473               END { if (nonempty) { for (i in files) print i; }; }'`; \
 474         test -z "$(CTAGS_ARGS)$$tags$$unique" \
 475           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 476              $$tags $$unique
 477
 478 GTAGS:
 479         here=`$(am__cd) $(top_builddir) && pwd` \
 480           && cd $(top_srcdir) \
 481           && gtags -i $(GTAGS_ARGS) $$here
 482
 483 distclean-tags:
 484         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 485
 486 distdir: $(DISTFILES)
 487         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 488         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 489         list='$(DISTFILES)'; \
 490           dist_files=`for file in $$list; do echo $$file; done | \
 491           sed -e "s|^$$srcdirstrip/||;t" \
 492               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 493         case $$dist_files in \
 494           */*) $(MKDIR_P) `echo "$$dist_files" | \
 495                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 496                            sort -u` ;; \
 497         esac; \
 498         for file in $$dist_files; do \
 499           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 500           if test -d $$d/$$file; then \
 501             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 502             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 503               cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 504             fi; \
 505             cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
 506           else \
 507             test -f $(distdir)/$$file \
 508             || cp -p $$d/$$file $(distdir)/$$file \
 509             || exit 1; \
 510           fi; \
 511         done
 512         list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 513           if test "$$subdir" = .; then :; else \
 514             test -d "$(distdir)/$$subdir" \
 515             || $(MKDIR_P) "$(distdir)/$$subdir" \
 516             || exit 1; \
 517             distdir=`$(am__cd) $(distdir) && pwd`; \
 518             top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
 519             (cd $$subdir && \
 520               $(MAKE) $(AM_MAKEFLAGS) \
 521                 top_distdir="$$top_distdir" \
 522                 distdir="$$distdir/$$subdir" \
 523                 am__remove_distdir=: \
 524                 am__skip_length_check=: \
 525                 distdir) \
 526               || exit 1; \
 527           fi; \
 528         done
 529 check-am: all-am
 530 check: check-recursive
 531 all-am: Makefile $(DATA)
 532 installdirs: installdirs-recursive
 533 installdirs-am:
 534         for dir in "$(DESTDIR)$(docdir)"; do \
 535           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 536         done
 537 install: install-recursive
 538 install-exec: install-exec-recursive
 539 install-data: install-data-recursive
 540 uninstall: uninstall-recursive
 541
 542 install-am: all-am
 543         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 544
 545 installcheck: installcheck-recursive
 546 install-strip:
 547         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 548           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 549           `test -z '$(STRIP)' || \
 550             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 551 mostlyclean-generic:
 552
 553 clean-generic:
 554         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 555
 556 distclean-generic:
 557         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 558         -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 559
 560 maintainer-clean-generic:
 561         @echo "This command is intended for maintainers to use"
 562         @echo "it deletes files that may require special tools to rebuild."
 563         -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
 564 clean: clean-recursive
 565
 566 clean-am: clean-generic clean-libtool clean-local mostlyclean-am
 567
 568 distclean: distclean-recursive
 569         -rm -f Makefile
 570 distclean-am: clean-am distclean-generic distclean-tags
 571
 572 dvi: dvi-recursive
 573
 574 dvi-am:
 575
 576 html: html-recursive
 577
 578 info: info-recursive
 579
 580 info-am:
 581
 582 install-data-am: install-data-local install-docDATA
 583
 584 install-dvi: install-dvi-recursive
 585
 586 install-exec-am:
 587
 588 install-html: install-html-recursive
 589
 590 install-info: install-info-recursive
 591
 592 install-man:
 593
 594 install-pdf: install-pdf-recursive
 595
 596 install-ps: install-ps-recursive
 597
 598 installcheck-am:
 599
 600 maintainer-clean: maintainer-clean-recursive
 601         -rm -f Makefile
 602 maintainer-clean-am: distclean-am maintainer-clean-generic
 603
 604 mostlyclean: mostlyclean-recursive
 605
 606 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 607
 608 pdf: pdf-recursive
 609
 610 pdf-am:
 611
 612 ps: ps-recursive
 613
 614 ps-am:
 615
 616 uninstall-am: uninstall-docDATA uninstall-local
 617
 618 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
 619         install-strip
 620
 621 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 622         all all-am check check-am clean clean-generic clean-libtool \
 623         clean-local ctags ctags-recursive distclean distclean-generic \
 624         distclean-libtool distclean-tags distdir dvi dvi-am html \
 625         html-am info info-am install install-am install-data \
 626         install-data-am install-data-local install-docDATA install-dvi \
 627         install-dvi-am install-exec install-exec-am install-html \
 628         install-html-am install-info install-info-am install-man \
 629         install-pdf install-pdf-am install-ps install-ps-am \
 630         install-strip installcheck installcheck-am installdirs \
 631         installdirs-am maintainer-clean maintainer-clean-generic \
 632         mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
 633         ps ps-am tags tags-recursive uninstall uninstall-am \
 634         uninstall-docDATA uninstall-local
 635
 636
 637 # explicit rules for generating docs
 638 @BUILD_DOCS_TRUE@xifish.png: white-xifish.png
 639 @BUILD_DOCS_TRUE@       cp $< $@
 640
 641 @BUILD_DOCS_TRUE@Vorbis_I_spec.html Vorbis_I_spec.css: $(SPEC_TEX) $(SPEC_PNG) xifish.png
 642 @BUILD_DOCS_TRUE@       htlatex $<
 643
 644 @BUILD_DOCS_TRUE@Vorbis_I_spec.pdf: $(SPEC_TEX) $(SPEC_PNG) xifish.png
 645 @BUILD_DOCS_TRUE@       pdflatex $<
 646 @BUILD_DOCS_TRUE@       pdflatex $<
 647 @BUILD_DOCS_TRUE@       pdflatex $<
 648 @BUILD_DOCS_FALSE@Vorbis_I_spec.html: NO_DOCS_ERROR
 649 @BUILD_DOCS_FALSE@Vorbis_I_spec.pdf: NO_DOCS_ERROR
 650 @BUILD_DOCS_FALSE@NO_DOCS_ERROR:
 651 @BUILD_DOCS_FALSE@      @echo
 652 @BUILD_DOCS_FALSE@      @echo "*** Documentation has not been built! ***"
 653 @BUILD_DOCS_FALSE@      @echo "Try re-running after passing --enable-docs to configure."
 654 @BUILD_DOCS_FALSE@      @echo
 655
 656 @HAVE_DOXYGEN_TRUE@doxygen-build.stamp: Doxyfile $(top_srcdir)/include/vorbis/*.h
 657 @HAVE_DOXYGEN_TRUE@     doxygen
 658 @HAVE_DOXYGEN_TRUE@     touch doxygen-build.stamp
 659 @HAVE_DOXYGEN_FALSE@doxygen-build.stamp:
 660 @HAVE_DOXYGEN_FALSE@    echo "*** Warning: Doxygen not found; documentation will not be built."
 661 @HAVE_DOXYGEN_FALSE@    touch doxygen-build.stamp
 662
 663 install-data-local: doxygen-build.stamp
 664         $(mkinstalldirs) $(DESTDIR)$(docdir)
 665         if test -d vorbis; then \
 666           for dir in vorbis/*; do \
 667             if test -d $$dir; then \
 668               b=`basename $$dir`; \
 669               $(mkinstalldirs) $(DESTDIR)$(docdir)/$$b; \
 670               for f in $$dir/*; do \
 671                 $(INSTALL_DATA) $$f $(DESTDIR)$(docdir)/$$b; \
 672               done \
 673             fi \
 674           done \
 675         fi
 676
 677 uninstall-local:
 678         rm -rf $(DESTDIR)$(docdir)
 679
 680 clean-local:
 681         if test -d vorbis; then rm -rf vorbis; fi
 682         if test -f doxygen-build.stamp; then rm -f doxygen-build.stamp; fi
 683 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 684 # Otherwise a system limit (for SysV at least) may be exceeded.
 685 .NOEXPORT: