-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.2 from Makefile.am.
# Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
+build_triplet = i686-pc-linux-gnu
+host_triplet = i686-pc-linux-gnu
subdir = .
DIST_COMMON = README $(am__configure_deps) $(dist_doc_DATA) \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/config.h.in $(top_srcdir)/configure COPYING depcomp \
- install-sh missing
+ $(srcdir)/config.h.in $(top_srcdir)/configure COPYING \
+ config.guess config.rpath config.sub depcomp install-sh \
+ ltmain.sh missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
am__installdirs = "$(DESTDIR)$(docdir)"
DATA = $(dist_doc_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} /home/jsancho/proyectos/gacela/trunk/missing --run aclocal-1.11
AMTAR = ${SHELL} /home/jsancho/proyectos/gacela/trunk/missing --run tar
+AR = ar
AUTOCONF = ${SHELL} /home/jsancho/proyectos/gacela/trunk/missing --run autoconf
AUTOHEADER = ${SHELL} /home/jsancho/proyectos/gacela/trunk/missing --run autoheader
AUTOMAKE = ${SHELL} /home/jsancho/proyectos/gacela/trunk/missing --run automake-1.11
AWK = mawk
CC = gcc
CCDEPMODE = depmode=gcc3
-CFLAGS = -g -O2 -I/usr/include/freetype2
+CFLAGS = -g -O2
+CPP = gcc -E
CPPFLAGS =
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
+DLLTOOL = false
+DSYMUTIL =
+DUMPBIN =
ECHO_C =
ECHO_N = -n
ECHO_T =
+EGREP = /bin/grep -E
EXEEXT =
+FGREP = /bin/grep -F
+FTGL_LIBS = -lftgl
+GL_LIBS = -lGL -lGLU
+GREP = /bin/grep
GUILE = /usr/bin/guile
-GUILE_CFLAGS =
+GUILE_CFLAGS = -pthread -I/usr/include/guile/2.0
GUILE_CONFIG = /usr/bin/guile-config
-GUILE_LDFLAGS = -lguile -lltdl -lgmp -lcrypt -lm -lltdl
+GUILE_LDFLAGS = -lguile-2.0 -lgc
+GUILE_LIBS = -lguile-2.0 -lgc
+GUILE_LTLIBS = -lguile-2.0 -lgc
GUILE_TOOLS = /usr/bin/guile-tools
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+LD = /usr/bin/ld
LDFLAGS =
LIBOBJS =
-LIBS = -lreadline -lSDL -lSDL_image -lSDL_gfx -lSDL_mixer -lGL -lGLU -lftgl
+LIBS =
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO =
+LN_S = ln -s
LTLIBOBJS =
MAKEINFO = ${SHELL} /home/jsancho/proyectos/gacela/trunk/missing --run makeinfo
+MANIFEST_TOOL = :
MKDIR_P = /bin/mkdir -p
+NM = /usr/bin/nm -B
+NMEDIT =
+OBJDUMP = objdump
OBJEXT = o
+OTOOL =
+OTOOL64 =
PACKAGE = gacela
PACKAGE_BUGREPORT = jsf@jsancho.org
PACKAGE_NAME = gacela
PACKAGE_URL =
PACKAGE_VERSION = 0.5
PATH_SEPARATOR = :
+RANLIB = ranlib
+SDL_LIBS = -lSDL -lSDL_image -lSDL_gfx -lSDL_mixer
+SED = /bin/sed
SET_MAKE =
SHELL = /bin/bash
-STRIP =
+STRIP = strip
VERSION = 0.5
abs_builddir = /home/jsancho/proyectos/gacela/trunk
abs_srcdir = /home/jsancho/proyectos/gacela/trunk
abs_top_builddir = /home/jsancho/proyectos/gacela/trunk
abs_top_srcdir = /home/jsancho/proyectos/gacela/trunk
+ac_ct_AR = ar
ac_ct_CC = gcc
+ac_ct_DUMPBIN =
am__include = include
am__leading_dot = .
am__quote =
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
+build = i686-pc-linux-gnu
build_alias =
+build_cpu = i686
+build_os = linux-gnu
+build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
+host = i686-pc-linux-gnu
host_alias =
+host_cpu = i686
+host_os = linux-gnu
+host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
top_srcdir = .
SUBDIRS = src
dist_doc_DATA = README
+ACLOCAL_AMFLAGS = -I m4
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
-am--refresh:
+am--refresh: Makefile
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
$(am__aclocal_m4_deps):
config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
- else :; fi
+ @if test ! -f $@; then rm -f stamp-h1; else :; fi
+ @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
distclean-hdr:
-rm -f config.h stamp-h1
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool config.lt
install-dist_docDATA: $(dist_doc_DATA)
@$(NORMAL_INSTALL)
test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
@$(NORMAL_UNINSTALL)
@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- test -n "$$files" || exit 0; \
- echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(docdir)" && rm -f $$files
+ dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
$(am__remove_distdir)
dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-lzma: distdir
$(am__remove_distdir)
dist-xz: distdir
- tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__remove_distdir)
dist-tarZ: distdir
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
- @$(am__cd) '$(distuninstallcheck_dir)' \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
installcheck: installcheck-recursive
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
clean-generic:
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
-clean-am: clean-generic mostlyclean-am
+clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+distclean-am: clean-am distclean-generic distclean-hdr \
+ distclean-libtool distclean-tags
dvi: dvi-recursive
mostlyclean: mostlyclean-recursive
-mostlyclean-am: mostlyclean-generic
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-am clean clean-generic \
- ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
- dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
- distclean distclean-generic distclean-hdr distclean-tags \
- distcleancheck distdir distuninstallcheck dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dist_docDATA install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
- tags-recursive uninstall uninstall-am uninstall-dist_docDATA
+ clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
+ dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
+ distcheck distclean distclean-generic distclean-hdr \
+ distclean-libtool distclean-tags distcleancheck distdir \
+ distuninstallcheck dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am \
+ install-dist_docDATA install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+ uninstall uninstall-am uninstall-dist_docDATA
# Tell versions [3.59,3.63) of GNU make to not export all variables.
projects / gacela.git / blobdiff