From 4eeb94afcc7f69aaa58cc4c28c1c04f4d54e0ac4 Mon Sep 17 00:00:00 2001 From: Javier Sancho Date: Wed, 28 Aug 2019 16:49:35 +0200 Subject: [PATCH] Remove autotools --- INSTALL | 368 ------------------------------------------------ Makefile.am | 1 - configure.ac | 21 --- src/Makefile.am | 4 - 4 files changed, 394 deletions(-) delete mode 100644 INSTALL delete mode 100644 Makefile.am delete mode 100644 configure.ac delete mode 100644 src/Makefile.am diff --git a/INSTALL b/INSTALL deleted file mode 100644 index 8865734..0000000 --- a/INSTALL +++ /dev/null @@ -1,368 +0,0 @@ -Installation Instructions -************************* - - Copyright (C) 1994-1996, 1999-2002, 2004-2016 Free Software -Foundation, Inc. - - Copying and distribution of this file, with or without modification, -are permitted in any medium without royalty provided the copyright -notice and this notice are preserved. This file is offered as-is, -without warranty of any kind. - -Basic Installation -================== - - Briefly, the shell command './configure && make && make install' -should configure, build, and install this package. The following -more-detailed instructions are generic; see the 'README' file for -instructions specific to this package. Some packages provide this -'INSTALL' file but do not implement all of the features documented -below. The lack of an optional feature in a given package is not -necessarily a bug. More recommendations for GNU packages can be found -in *note Makefile Conventions: (standards)Makefile Conventions. - - The 'configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a 'Makefile' in each directory of the package. -It may also create one or more '.h' files containing system-dependent -definitions. Finally, it creates a shell script 'config.status' that -you can run in the future to recreate the current configuration, and a -file 'config.log' containing compiler output (useful mainly for -debugging 'configure'). - - It can also use an optional file (typically called 'config.cache' and -enabled with '--cache-file=config.cache' or simply '-C') that saves the -results of its tests to speed up reconfiguring. Caching is disabled by -default to prevent problems with accidental use of stale cache files. - - If you need to do unusual things to compile the package, please try -to figure out how 'configure' could check whether to do them, and mail -diffs or instructions to the address given in the 'README' so they can -be considered for the next release. If you are using the cache, and at -some point 'config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file 'configure.ac' (or 'configure.in') is used to create -'configure' by a program called 'autoconf'. You need 'configure.ac' if -you want to change it or regenerate 'configure' using a newer version of -'autoconf'. - - The simplest way to compile this package is: - - 1. 'cd' to the directory containing the package's source code and type - './configure' to configure the package for your system. - - Running 'configure' might take a while. While running, it prints - some messages telling which features it is checking for. - - 2. Type 'make' to compile the package. - - 3. Optionally, type 'make check' to run any self-tests that come with - the package, generally using the just-built uninstalled binaries. - - 4. Type 'make install' to install the programs and any data files and - documentation. When installing into a prefix owned by root, it is - recommended that the package be configured and built as a regular - user, and only the 'make install' phase executed with root - privileges. - - 5. Optionally, type 'make installcheck' to repeat any self-tests, but - this time using the binaries in their final installed location. - This target does not install anything. Running this target as a - regular user, particularly if the prior 'make install' required - root privileges, verifies that the installation completed - correctly. - - 6. You can remove the program binaries and object files from the - source code directory by typing 'make clean'. To also remove the - files that 'configure' created (so you can compile the package for - a different kind of computer), type 'make distclean'. There is - also a 'make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - - 7. Often, you can also type 'make uninstall' to remove the installed - files again. In practice, not all packages have tested that - uninstallation works correctly, even though it is required by the - GNU Coding Standards. - - 8. Some packages, particularly those that use Automake, provide 'make - distcheck', which can by used by developers to test that all other - targets like 'make install' and 'make uninstall' work correctly. - This target is generally not run by end users. - -Compilers and Options -===================== - - Some systems require unusual options for compilation or linking that -the 'configure' script does not know about. Run './configure --help' -for details on some of the pertinent environment variables. - - You can give 'configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here is -an example: - - ./configure CC=c99 CFLAGS=-g LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - - You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you can use GNU 'make'. 'cd' to the -directory where you want the object files and executables to go and run -the 'configure' script. 'configure' automatically checks for the source -code in the directory that 'configure' is in and in '..'. This is known -as a "VPATH" build. - - With a non-GNU 'make', it is safer to compile the package for one -architecture at a time in the source code directory. After you have -installed the package for one architecture, use 'make distclean' before -reconfiguring for another architecture. - - On MacOS X 10.5 and later systems, you can create libraries and -executables that work on multiple system types--known as "fat" or -"universal" binaries--by specifying multiple '-arch' options to the -compiler but only a single '-arch' option to the preprocessor. Like -this: - - ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ - CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ - CPP="gcc -E" CXXCPP="g++ -E" - - This is not guaranteed to produce working output in all cases, you -may have to build one architecture at a time and combine the results -using the 'lipo' tool if you have problems. - -Installation Names -================== - - By default, 'make install' installs the package's commands under -'/usr/local/bin', include files under '/usr/local/include', etc. You -can specify an installation prefix other than '/usr/local' by giving -'configure' the option '--prefix=PREFIX', where PREFIX must be an -absolute file name. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -pass the option '--exec-prefix=PREFIX' to 'configure', the package uses -PREFIX as the prefix for installing programs and libraries. -Documentation and other data files still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like '--bindir=DIR' to specify different values for particular -kinds of files. Run 'configure --help' for a list of the directories -you can set and what kinds of files go in them. In general, the default -for these options is expressed in terms of '${prefix}', so that -specifying just '--prefix' will affect all of the other directory -specifications that were not explicitly provided. - - The most portable way to affect installation locations is to pass the -correct locations to 'configure'; however, many packages provide one or -both of the following shortcuts of passing variable assignments to the -'make install' command line to change installation locations without -having to reconfigure or recompile. - - The first method involves providing an override variable for each -affected directory. For example, 'make install -prefix=/alternate/directory' will choose an alternate location for all -directory configuration variables that were expressed in terms of -'${prefix}'. Any directories that were specified during 'configure', -but not in terms of '${prefix}', must each be overridden at install time -for the entire installation to be relocated. The approach of makefile -variable overrides for each directory variable is required by the GNU -Coding Standards, and ideally causes no recompilation. However, some -platforms have known limitations with the semantics of shared libraries -that end up requiring recompilation when using this method, particularly -noticeable in packages that use GNU Libtool. - - The second method involves providing the 'DESTDIR' variable. For -example, 'make install DESTDIR=/alternate/directory' will prepend -'/alternate/directory' before all installation names. The approach of -'DESTDIR' overrides is not required by the GNU Coding Standards, and -does not work on platforms that have drive letters. On the other hand, -it does better at avoiding recompilation issues, and works well even -when some directory options were not specified in terms of '${prefix}' -at 'configure' time. - -Optional Features -================= - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving 'configure' the -option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'. - - Some packages pay attention to '--enable-FEATURE' options to -'configure', where FEATURE indicates an optional part of the package. -They may also pay attention to '--with-PACKAGE' options, where PACKAGE -is something like 'gnu-as' or 'x' (for the X Window System). The -'README' should mention any '--enable-' and '--with-' options that the -package recognizes. - - For packages that use the X Window System, 'configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the 'configure' options '--x-includes=DIR' and -'--x-libraries=DIR' to specify their locations. - - Some packages offer the ability to configure how verbose the -execution of 'make' will be. For these packages, running './configure ---enable-silent-rules' sets the default to minimal output, which can be -overridden with 'make V=1'; while running './configure ---disable-silent-rules' sets the default to verbose, which can be -overridden with 'make V=0'. - -Particular systems -================== - - On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC -is not installed, it is recommended to use the following options in -order to use an ANSI C compiler: - - ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" - -and if that doesn't work, install pre-built binaries of GCC for HP-UX. - - HP-UX 'make' updates targets which have the same time stamps as their -prerequisites, which makes it generally unusable when shipped generated -files such as 'configure' are involved. Use GNU 'make' instead. - - On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot -parse its '' header file. The option '-nodtk' can be used as a -workaround. If GNU CC is not installed, it is therefore recommended to -try - - ./configure CC="cc" - -and if that doesn't work, try - - ./configure CC="cc -nodtk" - - On Solaris, don't put '/usr/ucb' early in your 'PATH'. This -directory contains several dysfunctional programs; working variants of -these programs are available in '/usr/bin'. So, if you need '/usr/ucb' -in your 'PATH', put it _after_ '/usr/bin'. - - On Haiku, software installed for all users goes in '/boot/common', -not '/usr/local'. It is recommended to use the following options: - - ./configure --prefix=/boot/common - -Specifying the System Type -========================== - - There may be some features 'configure' cannot figure out -automatically, but needs to determine by the type of machine the package -will run on. Usually, assuming the package is built to be run on the -_same_ architectures, 'configure' can figure that out, but if it prints -a message saying it cannot guess the machine type, give it the -'--build=TYPE' option. TYPE can either be a short name for the system -type, such as 'sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS - KERNEL-OS - - See the file 'config.sub' for the possible values of each field. If -'config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the option '--target=TYPE' to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with '--host=TYPE'. - -Sharing Defaults -================ - - If you want to set default values for 'configure' scripts to share, -you can create a site shell script called 'config.site' that gives -default values for variables like 'CC', 'cache_file', and 'prefix'. -'configure' looks for 'PREFIX/share/config.site' if it exists, then -'PREFIX/etc/config.site' if it exists. Or, you can set the -'CONFIG_SITE' environment variable to the location of the site script. -A warning: not all 'configure' scripts look for a site script. - -Defining Variables -================== - - Variables not defined in a site shell script can be set in the -environment passed to 'configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the 'configure' command line, using 'VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -causes the specified 'gcc' to be used as the C compiler (unless it is -overridden in the site shell script). - -Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an -Autoconf limitation. Until the limitation is lifted, you can use this -workaround: - - CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash - -'configure' Invocation -====================== - - 'configure' recognizes the following options to control how it -operates. - -'--help' -'-h' - Print a summary of all of the options to 'configure', and exit. - -'--help=short' -'--help=recursive' - Print a summary of the options unique to this package's - 'configure', and exit. The 'short' variant lists options used only - in the top level, while the 'recursive' variant lists options also - present in any nested packages. - -'--version' -'-V' - Print the version of Autoconf used to generate the 'configure' - script, and exit. - -'--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally 'config.cache'. FILE defaults to '/dev/null' to - disable caching. - -'--config-cache' -'-C' - Alias for '--cache-file=config.cache'. - -'--quiet' -'--silent' -'-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to '/dev/null' (any error - messages will still be shown). - -'--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - 'configure' can determine that directory automatically. - -'--prefix=DIR' - Use DIR as the installation prefix. *note Installation Names:: for - more details, including other options available for fine-tuning the - installation locations. - -'--no-create' -'-n' - Run the configure checks, but stop before creating any output - files. - -'configure' also accepts some other, not widely useful, options. Run -'configure --help' for more details. diff --git a/Makefile.am b/Makefile.am deleted file mode 100644 index 1bfdcf4..0000000 --- a/Makefile.am +++ /dev/null @@ -1 +0,0 @@ -SUBDIRS=src diff --git a/configure.ac b/configure.ac deleted file mode 100644 index 94780b7..0000000 --- a/configure.ac +++ /dev/null @@ -1,21 +0,0 @@ -AC_INIT([DungeonMaster], [0.1], [jsf@jsancho.org]) -AM_INIT_AUTOMAKE([-Wall -Werror foreign]) - -AC_PROG_CXX -AC_LANG([C++]) - -PKG_CHECK_MODULES([GUILE], [guile-2.2]) - -AC_CHECK_LIB( - [Irrlicht], - [createDevice], - [], - AC_MSG_ERROR([Missing Irrlicht lib. Try option --with-irrlicht-lib]) -) - -AC_CONFIG_FILES([ - Makefile - src/Makefile -]) - -AC_OUTPUT diff --git a/src/Makefile.am b/src/Makefile.am deleted file mode 100644 index 7ae7ce0..0000000 --- a/src/Makefile.am +++ /dev/null @@ -1,4 +0,0 @@ -bin_PROGRAMS = $(top_builddir)/DungeonMaster -__top_builddir__DungeonMaster_SOURCES = generators.cpp main.cpp mods.cpp paths.cpp -__top_builddir__DungeonMaster_CPPFLAGS = @GUILE_CFLAGS@ -__top_builddir__DungeonMaster_LDFLAGS = @GUILE_LIBS@ -- 2.39.2